If the display cannot be accessed due to a fault or a factory reset is required without accessing the device web page: – Turn off the adapter – Simultaneously press the # (hash) and * (asterisk) keys – Power the adapter This operation could in some cases also bring the apparatus back to life.
Read More
By default, the AT800DP adapter does not allow you to configure a username other than the telephone extension via the web: in fact, only the UserID field appears). However, this configuration can be done via the configuration file. The device must first be fully configured as indicated in the configuration manual, including the SIP account […]
Read More
For the automatic configuration of a large number of terminals, we recommend the use of some devices dedicated to the purpose, in particular a router / DHCP server and at least one PoE switch, to be added to the corporate network configuration. The new router will act as a DHCP server for IP phones powered […]
Read More
If, when typing the same digit quickly from the keypad of an IP-6060 telephone (by Polycom), the characters associated with the pressed button appear (eg 222 could type the letter b), probably the phone has an outdated firmware version. Check that the version is the one indicated in the manuals (latest version supported: 4.0.4)
Read More
In Polycom phones it is possible to configure a key for sending DTMF tone codes to activate particular functions (for example the door opener code of an intercom, entering your PIN code to access a particular service, etc.). In Polycom phones, particularly in the IP 6500 model (VVX 500), this is achieved exclusively through the […]
Read More
The 2N Helios IP Vario device is an IP video door entry unit which, configured in connection with a VOIspeed switchboard, allows the use of an audio / video door entry station with the possibility of door or gate opener (see technical specifications) and to reproduce images on videophones connected to the VOIspeed switchboard or […]
Read More
The Cisco SPA 112 is a SIP adapter for analog phones with 2 FXS ports. It therefore allows you to integrate up to two traditional analog devices (BCA and FAX) as extensions of the VOIspeed switchboard and thus take advantage of all the advanced functions of the PBX. Attention: the supported firmware version is 1.3.5 […]
Read More
In this article we will see how to configure a company directory on IP-DECT Spectralink 400 and 6500 servers and how it can then be consulted from connected DECT phones. The guide below can be used on Spectralink IP-DECT Server with firmware version equal to or higher than PCS13_. NOTE: Only 74xx-75xx-76xx series phones can […]
Read More
The Mediatrix Gateways for ISDN lines of the 4400, 3300 and G7 series are the products certified by Teamsystem Communication for the interconnection of the VOIspeed switchboard to the ISDN and PRI digital telephone lines. The certified Mediatrix come from the factory with a basic configuration ideal for operation with VOIspeed and with most telephone […]
Read More
