If the display cannot be accessed due to a fault or a factory reset is required without accessing the device web page: – Turn off the adapter – Simultaneously press the # (hash) and * (asterisk) keys – Power the adapter This operation could in some cases also bring the apparatus back to life.
Read More
By default, the AT800DP adapter does not allow you to configure a username other than the telephone extension via the web: in fact, only the UserID field appears). However, this configuration can be done via the configuration file. The device must first be fully configured as indicated in the configuration manual, including the SIP account […]
Read More
For the automatic configuration of a large number of terminals, we recommend the use of some devices dedicated to the purpose, in particular a router / DHCP server and at least one PoE switch, to be added to the corporate network configuration. The new router will act as a DHCP server for IP phones powered […]
Read More
If, when typing the same digit quickly from the keypad of an IP-6060 telephone (by Polycom), the characters associated with the pressed button appear (eg 222 could type the letter b), probably the phone has an outdated firmware version. Check that the version is the one indicated in the manuals (latest version supported: 4.0.4)
Read More
In Polycom phones it is possible to configure a key for sending DTMF tone codes to activate particular functions (for example the door opener code of an intercom, entering your PIN code to access a particular service, etc.). In Polycom phones, particularly in the IP 6500 model (VVX 500), this is achieved exclusively through the […]
Read More
The AT800DP / CT11 device is a SIP adapter for headphones, with LCD display, POE compatible. It also supports the standard 12V, 500mA power supply (the power supply is not provided), in cases where you do not have a POE switch. It is suitable for those workstations where the operator must have his hands free […]
Read More
It is advisable to configure the Yealink T19P IP Phone always using the self-provisioning function because it is faster and absolutely error-free. Configuration is done via the web, by connecting with a browser to the phone’s IP address. Obtain the IP directly from the phone by pressing the Menu softkey (bottom right below the display) […]
Read More
It is advisable to configure the Yealink T46G IP Phone always using the self-provisioning function because it is faster and absolutely error-free. The configuration of the Yealink T46G is done via the web, by connecting with a browser to the phone’s IP address. Obtain the IP directly from the phone by pressing the Menu softkey […]
Read More
The Plantronics CS540 headset and Yealink EHS36 adapter provide a complete DECT headset solution for Yealink IP phones (T27P and T46G compatible models). KEY FEATURES OF THE CS540 DECT PLANTRONICS HEADSET CONTENTS OF THE PACKAGE OF THE YEALINK EHS36 ADAPTER EHS36 PLANTRONICS HEADSET CONNECTION DIAGRAM – ADAPTER – IP PHONE SCHEME HEADSET FUNCTIONS PLANTRONICS Headset […]
Read More
